*Exact model shown in 360° view may vary
The MT4 features a variety of configurations enabling you to find the exact configuration you need. A ROPS and Cab version are available with highly featured operator platforms/cabs. The ergonomic design provides all-day comfort, as the robust frame provides high-capacity front loader and three point lift.
|LOADER LIFT CAPACITY 2,981 lbs.||HITCH LIFT 4,079 lbs.|
|ENGINE HP 68.0 HP||PTO HP 60.0 HP|
MT468 – 68HP
Easiest PTO to operate that can be turned on or off with a switch.
DUAL PEDAL 3 RANGE HST
Easier and more comfortable than rocker pedals.
STANDARD FULLY SYNCHRONIZED TRANSMISSION & 16×16 SYNCHRO SHUTTLE
Change gears without having to stop. 16 forward / 16 reverse gear transmission provides more operating speeds than others in its class for superior control, precision and safe operations for virtually any application.
STANDARD 2 SETS OF REMOTE VALVES WITH DETENT
Adds functionality and improves ease of use by allowing attachment of hydraulically controlled implements without the high, additional costs like others in its class to add the remotes as options.
Category 2 with hitch lift capacity of 4,079 lbs. allows easier attachment of a wide variety of implements.
STANDARD TILT & POWER STEERING
Makes turning easier, improves control and reduces fatigue.
FENDER MOUNTED JOYSTICK FOR FRONT END LOADER
Easily accessible for maximum comfort and convenience.
STANDARD FOLDABLE ROPS
Allows Storage in low clearance buildings or sheds.
YOUR CHOICE OF TIRES AT NO ADDITIONAL COST*
Choose Ag or Industrial tires at no additional cost. *Subject to dealer inventory.
Category 3 with hitch lift capacity of 4,079 lbs. allows easier attachment of a wide variety of implements.
STANDARD REAR WORK LIGHT
Adjustable light to improve visibility where you need it.
7 PIN CONNECTOR
Provides electrical power for implements when needed.
STANDARD DRAW BAR
Increases the usefulness of the tractor without the additional optional cost.
LARGE FUEL TANK
Provides long operation times between fill-ups.
FLAT PLATFORM AND RUBBER MAT
Roomy, spacious and comfortable.
LS CRDI TIER 4 ENGINE
Generates more power with less noise, fuel consumption, vibration and emissions. Standard preheat starting aid helps starting in cold weather. Includes engine speed cruise control.
DELUXE ADJUSTABLE SEAT WITH ARM RESTS AND RETRACTABLE SEAT BELT
Keeps you in a comfortable and safe position for maximum control.
- Type: Vertical Water-Cooled 4Cycle Diesel Engine
- Model (Tier 4): L4C25-T
- Engine HP (Gross): 68
- PTO HP: 60
- Rated Speed (RPM): 2,500
- Displacement (cu. in): 152.8
- Fuel Tank Capacity (gal): 21.1
- Alternator(V-A): 12 – 70
- Transmission: Synchro Shuttle / Power Shuttle
- No. of Speed: F16 x R16
- Brakes: Wet, Multi Disc
- Steering: Hydrostatic Power Steering
- Type: Independent
- Rear, rpm: 540
- Control System: Position/Draft
- Implement pump (gpm): 9.9
- Steering pump (gpm): 4.6
- Total flow (gpm): 14.5
- Category, 3 pt hitch: CAT II
- Hitch Lift capacity, lbs(Hitch end): 4,079
- Remote Valves: 2 pairs (Front), 2/3 pairs (Rear)
- Overall length with 3pt (in.): 138.6
- Wheelbase (in.): 80.3
- Min. overall width with Ag tires (in.): 70
- Height to top of Cab with Ag tires (in.): 103
- Ag Front/Rear: 9.5 – 20 / 16.9 – 24
- Industrial Front/Rear: 10.5/80 – 18 / 19.5L – 24
- Total weight without ballast (lbs.): 4,674
3rd Remote Valve (Open Station)
Horn (Switch kit)
7 Pole Connector
FRONT LOADER – LL5106
- Bucker Size (in): 78
- Maximum Lift height (in): 116.3
- Clearance with Attachment Dump (in): 84.7
- Reach at Maximum Height (in): 6.6
- Maximum Dump Angle (deg.) 71
- Maximum Rollback Angle (deg.): 48
- Digging Depth (in): 4.1
- Overall Height in Carry Position (in): 67.6
- Lift Capacity(@ Pivot pin) (lbs.) 2,739
- Breakout Force(@ Pivot pin) (lbs.): 4,556
- Approx. Weight(Loader w/o Bucket), lbs.: 1,014
BACKHOE – LB3102
- Digging Depth (in): 94.4
- Reach from centerline of swing Pivot (in): 136.1
- Loading Height (in): 80.3
- Swing Arc (deg.): 180
- Transport Height (in): 92.9
- Bucket Rotating (deg.): 180
- Stabilizer Spread(Down position) (in): 68.7
- Stabilizer Spread(Up position) (in): 46.4
- Bucket Digging force (lbs): 3,748