MT2 Tractor ROPS Open Cab

SERIES



dumbbell iconLOADER LIFT CAPACITY 1,965 lbs. tractor iconHITCH LIFT 1,808 lbs.
lightning iconENGINE HP 24.6 HP tractor wheel iconPTO HP 19.2 HP

 

Brochure LS Model Comparison Get Pre-Approved Competitive Comparison

New MT226E – 24.6HP

*Exact model shown in 360° view may vary

Features

  • Redesigned air conditioning and roof configuration, providing additional head space and increased forward visibility
  • Much improved seat comfortability
  • Cruise control
  • Factory A/C cab available in a 25HP tractor
  • New hood design (LS Family look), Grill open space plus 20%
  • LED head Lamp
  • 1 Inch large tire size and four different tire options
  • Larger lifting capacity, loader lifting capacity of New MT226E (LL3301/2) 1,965lbs. New MT2E & MT2 (LL3303) 2,506lbs.
  • Workability, 4-point mount structure as well as digging depth of 97.2” and bucket digging force of 3,663lbs.
  • TF-LCD instrument panel providing various information like, regen time, oil change interval, etc.
  • E/G RPM interlocking switch (STD). When working at low RPM, instantaneous RPM can be increased by simply manipulating the toggle switch to momentarily increase loader speed/lift. (option)

SPECIFICATIONS

ENGINE

  • Type: 3 Cylinder, Liquid-cooled, Diesel, NA, IDI
  • Model (Tier 4): MHI
  • Engine HP (Gross): 24.6
  • PTO HP: 19.2
  • Rated Speed (RPM): 2,500
  • Displacement (cu. in): 80.4
  • Fuel Tank Capacity (gal): 10.6
  • Alternator (V-A): 12V – 50 Amps

DRIVE TRAIN

  • Transmission Type: Synchro Shuttle
  • No. of Speed: F12 X R12
  • Brakes: Wet, Multi-disc
  • Steering: Hydrostatic Power Steering

PTO

  • Type: Independent
  • Rear, rpm: 540 (Standard)

HYDRAULIC SYSTEM

  • Control System: Position
  • Implement pump (gpm): 7.9
  • Steering pump (gpm): 4.6
  • Total flow (gpm): 12.5
  • Category, 3 pt hitch: CAT I
  • Hitch Lift capacity, lbs (Hitch end): 1,808
  • Remote Valves: Option

DIMENSION

  • Overall length (Frame to Link, in.): 119
  • Overall width with tires (in.): 66
  • Wheelbase (in.): 66
  • Height to top (in.): 95

TIRE SIZE

  • Ag Front / Rear: 7 – 14 / 11.2 – 24
  • IND Front / Rear: 27X8.50-15 / 43X16.00-20
  • VT Front / Rear: 27X8.50-15 / 43X16.00-20
  • Turf Front / Rear: 25X8.50-14 / 41X14.00-20

WEIGHT

  • Total weight without ballast (lbs.): 2,985

OPTIONS

STANDARD

  • Loader valve 2pair
  • TF LCD Instrument Panel
  • Lowerlink – General
  • Stabilizer – Check Link
  • Head Lamp(LED)
  • 12V Outlet
  • Rubber Mat
  • LH Side Step
  • Tool Box

OPTION

  • Remote valve 1st / 2nd
  • Cruise Control
  • Lower link – Telescopic
  • Mid PTO
  • External Lift Control Lever
  • Clevis Drawbar
  • Rear Work Lamp
  • 7-pole
  • Horn
  • Engine Kill Switch (Rear Fender)
  • Fuel Cap (Locking Type)
  • RH Side Step
  • Seat with Suspension & Armrest
  • Block Heater

ATTACHMENTS

FRONT LOADER – LL3001, LL3002

  • Bucket Size (in): 66
  • Maximum Lift height (in): 94.3
  • Clearance with Attachment Dump (in): 67
  • Reach at Maximum Height (in): 14.4
  • Maximum Dump Angle (deg.): 48
  • Maximum Rollback Angle (deg.): 42.5
  • Digging Depth (in): 4.8
  • Overall Height in Carry Position (in): 51.2
  • Lift Capacity (Bucket Pivot pin, MAX Height) (lbs.): 1,599
  • Lift Capacity(@ Pivot pin) (lbs.) 1,965
  • Breakout Force(@ Pivot pin) (lbs.): 2,962
  • Approx. Weight(Loader w/o Bucket)(lbs.): 741
See Attachment

Backhoe – LB3001

  • Digging Depth (in.): 97.2
  • Reach from centerline of swing pivot (in.): 127.2
  • Loading Height (in.): 76.2
  • Swing Arc (deg.): 160
  • Transport Height (in.): 81.8
  • Bucket Rotating (deg.): 180
  • Stabilizer Spread (down position) (in.): 67.5
  • Stabilizer Spread (up position) (in.): 50
  • Bucket Digging Force (lbs.): 3,663
See Attachment