4WD (Front Wheel Mechanical Assist)

Don't get stuck in the mud! Getting enough traction is important in performance ability—the LS MT122 sub-compact tractor offers 4WD so you can rest assured when you're getting heavy loader work completed. Experience the benefits of 4WD while loading. Shift with ease—go from 2WD to a 4WD with a simple move of a lever.

Dual Pedal, 2 Range HST

Easier and more comfortable than rocker pedals.

Independent PTO

Easiest PTO to operate that can be turned on or off with a switch.

PTO Selector Switch

Featuring PTO selector switch which allows you to select the rear-PTO, mid-PTO or both— which makes driving one of these tractors a pleasure.

Standard Mid PTO

2000 RPM Mid PTO for optional 60” mid-mount mower or 50” front mount snow blower.

Standard Hydrostatic Power Steering

Add control to your steering with hydrostatic power steering. Make your turning easier— improve control and reduce fatigue.

Standard Foldable ROPS

Allows storage in low clearance buildings or sheds.

Your Choice of Tires at No Additional Cost*

Your choice of turf or industrial tires at no additional cost. * Subject to dealer inventory.

3-Point Hitch

Category 1 with a hitch lift capacity of 970 lbs. is smooth and responsive.

Ergonomically Designed 3-Point Hitch Controls

Easily accessible for maximum comfort and convenience with hydraulic position control.

Easily Adjust Mowing Height

Adjusting the cutting height for the available 60" mid-mount mower is as easy as turning a dial.


Convenient storage keeps tools handy.

Modern Ergonomic Design

This small chassis compact is ergonomically designed and stylish.

Comfortable High-Back Seat

Supportive and comfortable seat reduces fatigue and reverses position for backhoe use.



  • Type: 3-cylinder, Indirect-injection, Water-cooled
  • Model (Tier 4 ): Yanmar 3TNV76F
  • Engine HP (Gross): 21.5
  • PTO HP: 15.0
  • Rated Speed (RPM): 3,000
  • Displacement (cu in.): 68.0
  • Fuel Tank Capacity (gal): 6.6
  • Alternator: 12V – 40 Amps

Drive Train

  • Transmission: Hydrostatic Drive
  • No. of Speeds: 2 Ranges
  • Brakes: Wet, Multi-Disc
  • Steering: Hydrostatic Power Steering


  • Type: Independent
  • Mid PTO: Standard (2500 rpm)
  • Rear PTO: Standard (540 rpm)

Hydraulic System

  • Implement pump (gpm): 4.6
  • Steering pump (gpm): 2.1
  • Total flow (gpm): 6.7
  • Category, 3 pt hitch: CAT 1
  • Hitch Lift capacity (lb.): 970
  • Lift control type: Position


  • Overall length with 3pt (in.): 97
  • Wheelbase (in.): 56
  • Min. overall width with IND tires (in.): 47
  • Height to top of ROPS (in.): 87


  • Total weight without ballast (lbs.): 1,433


Draw Bar
Rear Remote Valve – 1 Set
Work Light



  • ​Maximum Lift Height (@ Pivot Pin) (in.): 72
  • Clearance with Attachment Dump (in.): 50
  • Reach at Maximum Height (in.): 26.5
  • Maximum Rollback Angle (deg.): 45
  • Maximum Rollback Angle (deg.): 28
  • Digging Depth (in.): 4.7
  • Overall Height in Carry Position (in.): 41.5
  • Lift Capacity (@ Pivot Pin) (lbs.): 1,005
  • Approx. Weight (Loader w/o Bucket) (lbs.): 300


  • ​Digging Depth (in.): 77.8
  • Reach from Centerline of Swing Pivot (in.): 144.9
  • Loading Height (in.): 59.6
  • Swing Arc (deg.): 140
  • Transport Height (in.): 74.7
  • Bucket Rotating (deg.): 169.4
  • Stabilizer Spread (Down Position) (in.): 78.6
  • Stabilizer Spread (Up Position) (in.): 53.2
  • Bucket Digging Force (lbs.): 2,097
  • Shipping Weight (lbs.): 873


  • Cutting Width (in.): 60
  • Overall Width (in.): 75.6
  • Cutting Height Range (in.): 4
  • Deck Shell Thickness (in.): 0.126
  • Spindle Speed at 3000 RPM: 2,786
  • Blade Tip Speed (ft./min.): 14.932
  • Number of Blades: 3
  • Blade Length (in.): 20.5
  • Blade Width (in.): 2.48
  • Blade Thickness (in.): 0.236
  • Shipping Weight of Base 60” Deck (lbs.): 284.4